Equipment
|
|
|
|
|
|
|
|
|
#24 Braided Nylon Line
1 lb.(500g) Spool approx 700ft, the perfect line for replacing reels or spools.
This is the type of line which doesn't float, ideal for lining out in wrecks or caves.
2 Watt LED
-2 Watt LED
-Powered by 2 CR123 Lithium cells providing 6 hours of burn time
-13 Degree beam angle
-Machined from a solid rod of delrin
-Double o-ring seal
-Body dia. 1.2"(3cm) Bezel dia. 1.35"(3.4cm) 5"(12.6cm) Overall length
-500'(150m) depth rated
3 Watt LED
-3 Watt LED
-3 C-cell design providing 10 hours of burn time
-8 Degree beam angle
-Machined from a solid rod of delrin
-Double o-ring seal
-Body dia. 1.4"(3.5cm) Bezel dia. 1.75"(44cm) 8"(20cm) Overall length
-500'(150m) depth rated
9 Watt LED
The Lusca 9 Watt LED Handheld is powered by a 2.6 amp Li-ion rechargeable battery pack. Burntime is 3.5 hours and outputs 600 lumens at 5600 kelvin. It has a 6 degree focused beam. Emitter life is 50,000 hours.
Comes with an elastic handmount for hands free diving. It is 7.5"(19cm) in length and 1.8"(4.5cm) in diameter. Weights in at .9 lbs.(400g). The charger accepts 90 to 240 volt input and recharge time is 2 hours from a complete discharge. Additional battery packs are available.
AGIR 300 Bar (Metric)
300 bar pressure gauge, O2 clean. Brass body with tempered glass and luminous dial.
Diameter 63mm/2.5"
AGIR 9, 21 Watt HID
The AGIR Lugh is a 21 watt HID-light with 9 Ah NiHM battery pack. It gives you 210 minutes of burn time with light performance of 1500 Lumen and 6500 Kelvin.
It weighs 3.4 kg on land and 1.4 kg in water. Charging time is 5 hours with an empty battery. The canister is made of Delrin, the Goodman plate in PA6 and the hoop in aluminium. Binding screws are strengthened with recoil. Each and every LUGH 9 is hydrostatically tested to 120 meters before delivery.
The design of this light is relatively similar to the LM 10, 21 Watt HID with differences in the battery type, reflector, goodman handle material and brands engraving. This is the good choice for those who prefers NiMH.
AGIR Spring Heels
We offer you springs attached to the fins with screws and plates of stainless steel, instead of small brass pins. A short sleeve of rubber makes the spring easier to pull down when taking them off, e.g. for climbing a boat ladder.
Akona AKB 144
MATERIALS: Extra tough 1680 Ballistic nylon. Incredibly durable, water and stain resistant.
INTERIOR: Rust resistant hardware. Large full-length mesh pocket. Two compression straps with 1” side release buckles. Full length PVC backing for support.
Akona AKB 156
Rugged 600D poly/natural fiber blend with polyurethane interior coating. Incredibly durable, water and stain resistant.
Akona AKB 159
New red and black styling for 2009. The AKONA Research & Development team was asked to design a wheeled scuba bag to fit a complete set of dive gear in 15% less space.
Multiple handles were placed for easy grasping under any condition. The traditional external location of the regulator bag was moved to the interior for maximum protection
Aura Second Stage
Strong performance and a simple, non-adjustable design make the Aura an ideal reserve and/or recreational regulator.
• Balanced, non-adjustable downstream valve.
• Air Control Vane (A.C.V.) utilizes vacuum power to reduce work of breathing. • Compatible with 40% Nitrox.
Back Plate - Aluminum System
The backplate are cut in a shape that matches our wings perfectly. All holes, both in the centre recess and on the edges provides for Your personal configuration and optimum trim.
Both the bend of the plate, its angled slots and rounded lower corners enhance the ergonomics of which importance heavy gear is a reminder. The one piece harness comes with 5 D-rings and is fully adjustable./p> Please select 'standard' or 'small' size at the option box.
Back Plate - S/S 3 mm System
The backplate are cut in a shape that matches our wings perfectly. All holes, both in the centre recess and on the edges provides for Your personal configuration and optimum trim. 2.8 kg.
Both the bend of the plate, its angled slots and rounded lower corners enhance the ergonomics of which importance heavy gear is a reminder. The one piece harness comes with 5 D-rings and is fully adjustable.
Back Plate - S/S 5 mm System
The backplate are cut in a shape that matches our wings perfectly. All holes, both in the centre recess and on the edges provides for Your personal configuration and optimum trim. 4.4 kg.
Both the bend of the plate, its angled slots and rounded lower corners enhance the ergonomics of which importance heavy gear is a reminder. The one piece harness comes with 5 D-rings and is fully adjustable.
Back Plate - S/S 6 mm System
The backplate are cut in a shape that matches our wings perfectly. All holes, both in the centre recess and on the edges provides for Your personal configuration and optimum trim. 5.1 kg.
Both the bend of the plate, its angled slots and rounded lower corners enhance the ergonomics of which importance heavy gear is a reminder. The one piece harness comes with 5 D-rings and is fully adjustable.
Backplate with harness and hardwares
The Halcyon Secure Harness provides an infinitely adjustable fit, eliminating the uncomfortable movement found in conventional “jacket” buoyancy compensators. This perfectly tailored fit means that divers of all sizes can enjoy a custom diving configuration that supports unparalleled stability and diving comfort.
Moreover, this unique system is easily convertible, allowing one to adjust buoyancy or quickly switch from singles to doubles. Regardless of your future aspirations, this flexibility means your diving system can grow with you.
|
|
|
|
|
|
|
|















